Oud 02 CP by CP

Oscillator 1 timbre

Only square oscillators are enabled, resulting in a narrow sounding tone.

Pulse width of square oscillator is set to 59% (50% is perfectly square, 100% is very short pulsewave) and is modulated by Mod Env.

Mod Env mod-matrix 1 modulation amount for pulse width of square oscillator is 31.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 161.

Tone for oscillator 2 is manually set to 87.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 64.

Noise timbre

Noise level is manually set to 76.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 181.09Hz (122).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 96.54Hz (28) and is modulated by Note Vel, VCF Env.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 172.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 193.

Note Num direct modulation amount for low-pass filter envelope amount is 208.

Filter resonance is statically set to 26% (66).

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±5 cents (28).

Oscillators drift level is manually set to 29. Drift rate is 0

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 25. Effect 2 level is manually set to 25. Effect 3 level is manually set to 25. Effect 4 level is manually set to 60.

TC Deep Reverb fx

not yet complete

Ambient Reverb fx

not yet complete

Room Reverb fx

not yet complete

Vintage Room Reverb fx

not yet complete


Mod Wheel modulator

Controls UNKNOWN DESTINATION.

functiontypedestinationamount
fx matrix UNKNOWN DESTINATION 76

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 208

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 172
menu VCF Envelope Velocity Sensitivity 193

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 1.57s (158)
VCA Envelope Sustain Level 0% (0)
VCA Envelope Release Time 1.29s (139)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 172
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 4.6s (178)
VCF Envelope Sustain Level 22% (56)
VCF Envelope Release Time 23.46s (231)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0

Mod Env modulator

Controls OSC 1 Pulse Width Modulation Depth.

functiontypedestinationamount
timbre matrix OSC 1 Pulse Width Modulation Depth 31
namevalue
Mod Envelope Attack Time 0s (0)
Mod Envelope Decay Time 32s (255)
Mod Envelope Sustain Level 45% (115)
Mod Envelope Release Time 1.25s (136)
Mod Envelope Trigger Mode Key (0)
Mod Envelope Attack Curve 128
Mod Envelope Decay Curve 0
Mod Envelope Sustain Curve 128
Mod Envelope Attack Curve 0